You can restore your existing BitBox wallet on a new or already reset compatible BitBox using its microSD backup. You do not need the old device or its device password. If the wallet used an optional passphrase, you also need that exact passphrase: it is not included in the backup.
Restoration recreates access to the wallet; it does not move your coins. Use the BitBoxApp on a supported phone, tablet or computer with a compatible BitBox connected. After restoring, check that the intended accounts and transaction history appear.
Before you restore
Have the following ready:
- A new or already reset compatible BitBox and a compatible connection to the device running the BitBoxApp.
- The microSD card containing the backup of the wallet you want to recover.
- The exact original optional passphrase, if that wallet used one. This is separate from the device password you will set during restoration.
- The latest BitBoxApp from the official download page.
You can also use this workflow to practise restoring your wallet. Before resetting a BitBox that already contains a wallet, make sure you have a verified backup and any required passphrase for that wallet. Once you have these ready, follow the factory-reset guide before returning here. If you cannot identify the required backup or passphrase, contact Support before erasing the device.
Keep your backup private
For this procedure, insert the backup card only into the BitBox, not into another device or a card reader. Never upload or send the backup file, recovery words, passwords or an optional passphrase. BitBox Support will never ask for them.
If you only want to check a backup while you can still unlock the original wallet, use microSD backup verification instead. You do not need to reset or restore the device for that check.
1. Connect your BitBox and select the backup
The screenshots show the English app interface. Follow the written steps and check the details for your own device and backup.
- Open the BitBoxApp and connect the new or already reset compatible BitBox to the phone, tablet or computer running the app. Follow any firmware-installation or update instructions in the app. If the device asks you to choose its screen orientation, tap the side you want to use as the top.
- If a pairing code appears, compare the complete code on the BitBox display with the code in the app. Confirm on the BitBox only if they match, then select Continue in the app. If they differ, stop.

- On Setup your wallet, select Restore from microSD card in the Restore section. Do not select Create wallet: that would create a different wallet.

- When the app asks for the card, insert your backup microSD card into the BitBox, with the printed side facing the same direction as the screen. Push gently until it clicks into place. The app displays the backups found on the card.

- Find the intended backup by checking its name, creation date and full ID against your existing records. If several backups are listed, select the one belonging to the wallet you want to recover. Do not choose one merely because it is the newest. If you cannot identify the intended backup, stop and contact Support.
- Select Restore. The app shows the selected backup's details and asks you to continue on the BitBox.

2. Confirm restoration and set a device password
Continue on the BitBox itself. The app displays guidance; enter wallet secrets only on the BitBox, not in the app.
- On the BitBox, confirm Restore backup? only if you intend to restore the selected backup.
- Review the backup name and ID shown on the BitBox. Scroll through the full ID and compare it with the selected backup in the app. Cancel if the details differ or you are unsure which backup you selected.
- If the device asks you to confirm the current date and time, check them before confirming. If they are incorrect, cancel and check the clock on the device running the BitBoxApp before retrying.
- Use the BitBox's touch controls to set a device password and enter it again when prompted. It can differ from the old device password without changing the wallet restored from the backup.

- Keep the BitBox connected until the app displays Backup Restored! Read the security reminders, remove the microSD card and store it securely, then select Get started. Restoration does not delete the backup file from the card.

This message confirms that the backup was restored. You still need to open any passphrase-protected wallet and check the expected account history below.
If the card contains several backups
One card can contain backups of different wallets. Each entry has its own name, date and ID. The list below illustrates the selection screen; the backup you select there must match the details you confirm on the BitBox. If the restored wallet later looks unfamiliar, preserve the card and revisit which entry you selected before considering another restoration.

3. Open and verify the intended wallet
- If the original wallet used an optional passphrase: re-enable the feature if needed and enter the same passphrase on the BitBox. Follow the optional-passphrase guide for the controls and full procedure. Check capitalization, spaces and symbols exactly. A different entry opens a different wallet without a wrong-passphrase error; you do not need to restore the backup again just to re-enter a passphrase. If you did not use a passphrase, do not create one during recovery. If a passphrase prompt appears, leave it empty to open the standard wallet.
- Allow the relevant accounts in the BitBoxApp to finish synchronizing. A balance shown during synchronization may be incomplete.
- Check that the accounts and transaction history you expect are present. Additional accounts or tokens may need to be made visible again. If anything is missing or unfamiliar, follow the guidance below before using the wallet.
Recovery is complete when you can unlock the BitBox with its device password, open the intended wallet with any required original passphrase, and see the expected account history and balances after synchronization. Keep the microSD backup securely stored, separately from the BitBox, and keep any optional passphrase backed up separately.
If restoration fails or accounts are missing
The card or intended backup does not appear
Check that the card is fully inserted into the BitBox and that it is the card you intended to use. If the app still cannot read it or the expected backup is absent, stop and preserve the card and any other existing backups. Do not format the card, overwrite it with a new backup or upload its files to a recovery service.
The device cannot restore the backup
Note the exact error and the point where restoration stopped. Keep the original backup unchanged and contact Support before trying further recovery actions. If you have another existing backup copy, mention that without sending it.
Restoration finishes, but the expected wallet history is missing
Check synchronization, which backup you selected and whether the original wallet used an optional passphrase. Do not reset the device again, create a new wallet or move funds merely to make a balance appear. Follow Missing accounts after restoring your BitBox wallet for account visibility and compatibility checks. Preserve any other device that still gives you access to the original wallet.
You have a backup but no working BitBox
We recommend restoring on a replacement compatible BitBox. Extracting recovery words on a computer is a separate, advanced emergency procedure with additional exposure risks, not a routine way to inspect or verify the card. If normal hardware recovery is unavailable, read the emergency backup-recovery guide before handling the backup on a computer, or ask Support for guidance.
Contact BitBox Support
If you cannot identify the correct backup, complete restoration or confirm the intended wallet, contact BitBox Support. Include your BitBox model, the operating system of the phone, tablet or computer running the app, BitBoxApp and firmware versions if known, the failed step and exact error text. For missing history, add the affected cryptocurrency or network and whether you used an optional passphrase. Never send backup files, recovery words, passwords, a passphrase or screenshots containing them.